TIcket: UEO-349-18906 Sometimes we receive server UP and DOWN alerts. In order to find out what is the root cause we need to perform the steps below: 1. Check switch, if there’s any limit for pps 2. Check server with nload -m command to see the current bandwidth usage (we may also refer to MRTG ..
Category : Monitoring
For minimal installation make sure to have pciutils before proceeding. yum install pciutils -y Determine which script to be us an run command below lspci -nn | grep LSI If you found result like below then use script lsi_raid_check 02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] [1000:0079] (rev ..